FOAMING AIR GUN
Increase labour productivity with the Foaming Air Gun. This easy-to-use spraying and foaming tool can be used anywhere that your hose can reach.
Just fill the container to your choice of dilution, and connect the Foaming Air Gun to an air hose. Even a 30-1 dilution of Econo-Clean with water produces a rich, thick foam, similar to shaving cream in consistency.
Features & Benefits:
Strong & durable metal parts
No installation required
Compact, easy to store
Maximizes effectiveness of Econo-Clean
Allows maximum adhesion time because you are applying Econo-Clean as a thick foam
Food prep areas
Food processing plants
Animal care facilities
Health care facilities
Paving contractors’ facilities (asphalt release agents)
Fill the holding tank with water up to about 950 ml. Add enough Econo-Clean concentrate to bring it to 1000 ml; adding about 50 ml of concentrate. This dilution, roughly 20-1, will produce a thick and rich foam. The foaming air gun allows you to cover your whole vehicle with a thick foam in the time it takes you to walk around it. The foam sticks to the vertical vehicle sides, windows, tires and wheels for up to 5 minutes, allowing plenty of time for the Econo-Clean to emulsify and break down the dirt, grease, brake dust etc. Eliminate the need to use a pail with dirty solution that needs to be replaced often. It also prevents rocks, dirt and debris from being transferred onto paint, resulting in scratches.
Once the foam has covered the whole area, including the tires, use either a soft bristle brush, sponge, or cloth to remove hard-to-clean dirt and debris. If you are doing hard to clean tasks such as engines, shop walls, dairy barn walls etc. then you can fill the holding reservoir to the 900 ml level with water, topping up with 100 ml of Econo-Clean concentrate to the 1,000 ml level.
Foaming Air Gun $175 (includes air pressure regulator)Type your paragraph here.
Econo-Chem 2016 ©